ScanNCut Tips & Tricks

Use a standard blade depth of 2 for tissue paper and cellophane. Always perform a test cut first.
-Liz Hicks

Starch and press cotton based fabrics before sticking to the mat for cutting.
-Vanessa Wilson

Use a brayer to firmly adhere paper or fabric to the mat.
-Julie Fei-Fan Balzer

When working with thick layers of fabric, play around with the cutting pressure setting on a scrap piece of fabric before adjusting blade deeper until you find the perfect setting.
-Vanessa Wilson

Using Starch
Starch and press cotton based fabrics before sticking to the mat for cutting.
-Vanessa Wilson

Hold the mat down with a few fingers at the top while you press the load mat button to ensure it rolls in flat and evenly.
-Vanessa Wilson

When scanning a drawn image or a smaller image, test the lines by drawing first. By doing this step, you will ensure that the cut line is complete.
-Kacia Hosmer

Don’t throw anything away! Save the negatives from your cuts for use on future projects.
-Julie Fei-Fan Balzer

When working with fibrous paper such as mulberry paper, coat the back side lightly with a clear-drying adhesive and let dry before using in the machine so the fibers don’t get stuck onto your mat and the cuts are clean.
-May Flaum

Use a brayer to firmly adhere paper or fabric to the mat.
-Julie Fei-Fan Balzer

Hold the mat down with a few fingers at the top while you press the load mat button to ensure it rolls in flat and evenly.
-Vanessa Wilson

When cutting fabric, make sure the outside edges of your fabric are completely within the sticky area of the mat. Leaving any fabric hanging on the outside edge of the sticky mat grid can cause the fabric to lift off the mat.
-Vanessa Wilson

Always use two hands to feed in your mats–being sure both corners are touching the rollers, click the feed button and return your hand to the mat. Feeding the mat evenly will keep jams to a minimum and prevent your mat from bending at the corners.
-Kacia Hosmer

Use the on-screen grid to help place pieces to be cut when working with scraps of paper.
-May Flaum

Keep a list of blade settings that work well for your for commonly used papers attached via a sticky note to the back or side of the machine.
-May Flaum

When you try to cut through thicker mediums (ie: transparencies) and it doesn’t cut out all the way, double cutting works great. Just insert your mat back into the machine and then have it cut it out again and it should pop right out.
-Erin Bassett

When cutting out corrugated papers tape down the edges with blue painters tape or washi tape to make sure it stays in place.
-Erin Bassett

When cutting out corrugated paper place it on the mat bumpy side down /smooth side up.
-Erin Bassett

When using direct cut to cut out your own cursive handwriting, it’s good to have the letters of each word connect so that you can cut out the entire word instead of individual letters.

– Erin Bassett

Use the adhesive fabric support sheet with your standard mat when cutting materials that are porous, this will protect your mat from any fibers that may come off during cutting.

Always use two hands to feed in your mats–being sure both corners are touching the rollers, click the feed button and return your hand to the mat. Feeding the mat evenly will keep jams to a minimum and prevent your mat from bending at the corners.
-Kacia Hosmer

When testing blade length and pressure for a new material, always begin with the blade at a number smaller than recommended. You can always lengthen your blade, but you will preserve your mats by working the blade length up slowly.
-Kacia Hosmer

When cutting fabrics and quilting pieces, prepare and organize all of your fabrics prior to placing the adhesive support sheet onto your standard mat. Cut as many as you can in one sitting is recommended as allowing dust particles to stick adhesive fabric support sheet will lessen the adhesive.
-Kacia Hosmer

When using direct cut to cut out your own cursive handwriting, it’s good to have the letters of each word connect so that you can cut out the entire word instead of individual letters.
-Erin Bassett

Use a thick tip pen to create your own artwork for cutting, the thicker the pen, the more pronounced your cut file will be.
-Liz Hicks

When scanning a small item {such as a leave, small piece of paper, etc} use a white sheet of paper behind it. It will not only give you a higher contrast, but give you a clean area to crop down and focus on your cut lines.
-Kacia Hosmer

Keep all your attachments together in the box so you don’t lose them, make good use of the little pouch!
-Kathy Cano-Murillo

Store your custom designs on a memory stick and keep it handy in your craft room.
-Kathy Cano-Murillo

Keep a file journal. If you have scanned in patterns or cut outs that are similar, but hard to differentiate on the ScanNCut screen, always write down the file name and the description.
-Kacia Hosmer

I found it useful to use the standard mat for thick painted and altered paper.
-Alisa Burke

Stabilizing my fabric was a must- I had success with both starching fabric first and/or using a fusible stabilizer. It made the process of cutting fabric go smoothly and eliminated snags and ripping.
-Alisa Burke

Use the on-screen grid to help you place pieces to be cut when working with scraps of paper.
-May Flaum

Use the handle of your spatula to help get rid of any air bubbles between your mat and fabric.
-Liz Hicks

Keep a list of blade settings that work well for you for commonly used papers attached via a sticky note to the back or side of the machine.
-May Flaum

Once you place your paper or fabric on the mat, use the spatula to smooth out any bubbles or wrinkles. Simply drag it across the paper in one direction.
-Kathy Cano-Murillo

Use a brayer to firmly adhere paper or fabric to the mat
-Julie Fei-Fan Balzer

Make sure your paper/fabric is lined up evenly on the mat so your cuts will come out perfectly!
-Kathy Cano-Murillo

When placing your design on your mat, use the “background scan” icon to scan in your surface. This will place your design exactly where you would like on your surface. This can be used to safely place designs on surfaces that have already been cut from, simply scan your background in and place your design on an area that has not be used… it is that simple!
-Liz Hicks

Since I tend to work with a lot of altered materials (painted papers and fabric) I found that it was helpful to test a variety of materials and then create a list of test blade settings and keep this on hand as a “go to” for my different projects.
-Alisa Burke

Always test cut to check blade depth.
-Julie Fei-Fan Balzer

Use the Direct cut “shape” feature to scan in your background and cut special elements from your surface in your favorite shape
-Liz Hicks

Make sure your paper/fabric is lined up evenly on the mat so your cuts will come out perfectly!
-Kathy Cano-Murillo

Always use two hands to feed in your mats–being sure both corners are touching the rollers, click the feed button and return your hand to the mat. Feeding the mat evenly will keep jams to a minimum and prevent your mat from bending at the corners.
-Kacia Hosmer

Keep a file journal. If you have scanned in patterns or cut outs that are similar, but hard to differentiate on the ScanNCut screen, always write down the file name and the description.
-Kacia Hosmer

Since I tend to work with a lot of altered materials (painted papers and fabric) I found that it was helpful to test a variety of materials and then create a list of test blade settings and keep this on hand as a “go to” for my different projects.
-Alisa Burke

I love that fact that there are pre-loaded letters and designs in the machine and found it really useful to use these simple options but kick it up by using unique materials like hand painted fabric and paper.
-Alisa Burke

Since I like to use scraps and odd sizes of paper and fabric it was essential to make use of the on-screen grid to place those scraps.
-Alisa Burke

When scanning a small item {such as a leave, small piece of paper, etc} use a white sheet of paper behind it. It will not only give you a higher contrast, but give you a clean area to crop down and focus on your cut lines.
-Kacia Hosmer

When scanning, choose “delete size” and lower the margin numbers for a more accurate scan.
-Julie Fei-Fan Balzer

I found it useful to use the standard mat for thick painted and altered paper.
-Alisa Burke

If you are cutting a lot of paper and/or fabrics at time, you may want to clean out the blade chamber to make sure no paper pieces, threads, or fibers are near the blade. To do this-unscrew the blade holder and take a dry cloth to the inside of the holder and blade area using caution as the blade is sharp.

Make sure the fabric support sheet is flat with no creases. For best results, use a clean or brand new standard mat. This will help to make sure that there is full contact between the mat and the fabric support sheet. Then, position the fabric support sheet, glossy side down on the top of the standard mat. Slowly place the fabric support sheet onto the standard mat working from top to bottom, smoothing out any air bubbles along the way.

When cutting fabrics and quilting pieces, prepare and organize all of your fabrics prior to placing the adhesive support sheet onto your standard mat. Cut as many as you can in one sitting is recommended as allowing dust particles to stick adhesive fabric support sheet will lessen the adhesive.
-Kacia Hosmer